How Much Does a Fence Cost in DFW? (2026 Guide)

How much does a fence cost in DFW?

For a standard 6-foot privacy fence in the Dallas-Fort Worth area, a reasonable planning range is about $22–$45 per linear foot installed, depending on material and project conditions. A typical 150-foot backyard fence runs roughly $3,300–$6,750 installed. Other fence types, heights, and site conditions can fall outside this range — the sections below break down the main factors, or you can jump straight to an estimate built around your project.

Cost per linear foot

Pricing is quoted per linear foot of fence line — the total distance the fence runs, not the number of panels or the size of the yard.

These are planning ranges, not guaranteed contractor prices. Your actual quote can vary based on your property, access, terrain, materials, and other project details.

100 ft, 150 ft, and 200 ft fence cost examples

Here's what a standard 6-foot privacy fence typically costs installed, on flat ground, with no removal or gates:

Planning estimates only — get a price built around your specific fence line, gates, and site with the free calculator.

Pine vs. cedar

Pine is the more affordable option and generally holds up well when properly treated and stained. Cedar generally costs more than pressure-treated pine, but the difference depends on the project and contractor. Cedar can resist rot and insects more naturally and typically needs less upkeep over time, though results vary with climate, installation quality, and how well the fence is maintained. For a 150 ft fence, that's roughly the difference between $3,300–$4,800 (pine) and $4,500–$6,750 (cedar).

6 ft vs. 8 ft height

Going from a standard 6-foot fence to an 8-foot fence typically adds about 20% to the installed cost — more material and labor per linear foot, plus often additional permitting depending on your city. On a 150 ft pine fence, that's roughly $3,300–$4,800 at 6 ft versus an estimated $3,950–$5,750 at 8 ft.

Fence removal

Removing and hauling off an existing fence is an additional cost on top of installation, typically adding $3–$7 per linear foot. For a 150 ft project, that's roughly $450–$1,050 extra for teardown and disposal — the actual amount depends on the existing fence and site conditions.

Gates

Many residential fence projects include one or more walk gates. A typical walk gate may add roughly $250–$500, depending on the gate and hardware.

Terrain

Sloped or difficult-to-access properties (rocky, root-heavy, or hard-to-reach yards) can increase installation costs — extra labor for stepped panels, deeper post holes, or hand-digging where equipment can't reach. For planning purposes, the calculator uses an approximate 10–20% adjustment for more challenging terrain or access. On a flat 150 ft lot that's $3,300–$4,800; on more difficult terrain it's closer to $3,950–$5,750.

Why contractor quotes vary

Two contractors can walk the same yard and come back with noticeably different numbers. Common reasons: how busy they are that season, whether they subcontract labor or run their own crew, local permit and HOA requirements, gate hardware quality, post depth and concrete used, and how easily equipment can access the fence line. That's why the ranges above are a planning starting point, not a bid — the calculator can narrow that range to your project, but the number on your actual invoice comes from an on-site contractor quote.